Description
Due to high demand for a smaller more compact LED headlight for tight fitting applications we’re proud to introduce the all new, completely re-engineered VCm3000. We are very excited to introduce this new version of our previous VCm35, as we have been able to completely eliminate the fan and other compromises from our outgoing model.
This model uses our proven CSP LED chipset and is designed to fit in even the smallest confines.
Using an innovative miniaturized LED driver, we’ve been able to eliminate the external heatsink and fit the entire assembly within the headlight housing without compromising the beam pattern or light output.
This model uses our proven CSP LED chipset and is designed to fit in even the smallest confines.
Using an innovative miniaturized LED driver, we’ve been able to eliminate the external heatsink and fit the entire assembly within the headlight housing without compromising the beam pattern or light output.
The VCm3000 is only 10mm longer than a standard halogen headlight! This makes it suitable for use in custom headlight enclosures, motorcycles, and other applications previously too small for our other models.
The VCm3000 retains the same IP67 waterproof rating as our other models. This means it is protected from dust, shock and capable of withstanding water immersion between 15 cm and 1 meter for up to 30 minutes It also backed by the same lifetime warranty as every VintagecarLED product.
Each kit includes two 2 VCm3 bulbs.
Julio Gonzalez (verified owner) –
Nice lighting. I have not had the chance to try them at night and check the aiming. I am considering ordering the H3 bulbs for my auxiliary lights.
Albert Barnes (verified owner) –
I put this VCm3 bulb on my ‘79 Triumph Bonneville Motorcycle and the LED Lighting is great, a lot better than the old halogen bulb, it really gets out. The way the bulb mounts inside the
Housing wasn’t like the older halogen bulb, but I was able to get it installed Ok
Martin (verified owner) –
The bulb fits well in my 2003 Honda 919 motorcycle. It is bright enough on low and the high beams work well too…all as promised. A few years ago I purchased a set for my 1972 Ford F250 and they are still working well. Thank you Vintage Car LED.
LUIS (verified owner) –
Great bulbs. Much brighter than OEM, long lasting and perfect fit. Incredible customer support and service. I definitely recomend Vintage Car LCDs over other alternatives for collector cars & motorcycles in the market. I first tried their bulbs in 2015, now all my collector cars and scooter have their bulbs installed. I even installed a set in daughters Honda Pilot when her OEM bulbs burned out…. Thank you Thomas and Matt for you outstanding customer service and quality products.
Joe (verified owner) –
While I have not used to bulb yet on my project I will say I received excellent customer service. The initial bulbs received were a mistake, I got a mailing label from vintagecarleds and shipped them back no problem, and got the correct part back quickly. Very happy.
Eric (verified owner) –
Quick service and the bulbs are great! Very bright and easy fit into my reflectors. So much better than my 50 year old sealed beams. Have recommended them to several friends in my car Ckub.
Roger Cox (verified owner) –
Awesome lights! Brighter than my 17 GMC Sierra Denali lights. Brings new life to you car fersure and makes you excited about driving at night
Arden Neer (verified owner) –
I couldn’t drive my Speedster at night or at dusk it was scary I just couldn’t see. I purchased I set LED’s and what a DIFFERENCE !!!!! I no longer am nervous to drive at night!!
Greg (verified owner) –
I wanted to put a LED on my old Harley to take some load off the electrical system. I am pretty old school and would not consider putting one on that looked like it belonged on a spaceship. I was ready to give up as the studying I had done had revealed that alot of the replacement bulbs put didn’t line up inside the housing the same way a halogen does and although it is brighter, the led either blinds oncoming traffic or gives a sorry pattern.
By chance I came across these guys, and found they themselves have done the testing to match the right replacement bulb.
The installation was easy. Before removing the halogen, with bike upright and 10 from the wall I removed and reinstalled headlight being careful not to move the bike, and to my surprise, the led throws the same pattern at the same height as the halogen.
It is bright light anyone should be happy with. It took a good bit of load off my electrical system as well.
Tom Christiansen (verified owner) –
Will order some more for my other bikes.
Cheers Tom